4D product information for
Real Time Clock (RTC) module with Temperature Sensor for the Raspberry Pi, No Header Fitted
- Product Title: Real Time Clock (RTC) module with Temperature Sensor for the Raspberry Pi, No Header Fitted
- Manufacturer/Publisher: Fourth Dimension
- Stock Code: 4D-RaspberryPi-RealTimeClock-Temp-RTCT-NH
- QuickCode: 17954
- Format: Hardware
- Product Group: Raspberry Pi: GPIO, RTC & Sensors
- Condition: New
- Availability: Usually available from stock
A Battery backed up Real Time Clock card for the RaspberryPi Model A, A+, B, B+, Pi2, Pi3, Pi4 and Compute Module. The temperature sensor shows the ambient temperature around the sensor, not the CPU core temperature.
No header fitted.
Special version as requested by a number of customers.
Ideal if you want an ultra thin Model A Pi and are removing the Phono video socket and the clock would be the highest component. You will need to remove the 26pin header pins from the Pi and solder in four wires to the clock module.
Physical installation: Plugs into the GPIO pins. Fits within the footprint of the Raspberry Pi's PCB and is lower than the double USB socket so should fit into almost any case. Full fitting instructions are on our main website.
Real Time Clock chip: Maxim DS1338
Temperature Sensor: MCP9801 (LM75 compatible)
Cell (Battery): CR1620
Crystal Accuracy: 20ppm (better than 1 minute a month)
Battery Capacity: Over nine years!
Real Time Clock Module with Temperature Sensor
CR1620 Battery (unfitted)
Raspbian "wheezy" now supports the Real Time Clock (see fitting instructions above for how to enable this).
The official RISC OS downloads include Real Time Clock support!
We are current searching for Linux software for the temperature sensor, the MCP9801 is a commonly used chip that is software compatible with many other I2C temperature sensors. The temperature sensor hardware has been tested using RISC OS, and RISC OS software can be downloaded here.
Please contact us for Quantity discounts on orders of 10 or more.
Postage (By AIR):
UK: Included in the price
Rest of the World: £3.90
Additional RTCs no extra cost. e.g. Postage on two or more to Europe is £2.90
The extra postage will not show up when you 'check out', we will add it to the total when the order is processed!
- Price: £13.00 no VAT to pay!
- Free UK delivery on orders of £10 or more! (exceptions apply)
Over 500 cables and adaptors stocked!
Most orders of less than £10 will incur a £3 admin charge.
Items on special offer are while stocks last and may be time limited.
Items marked S/H are secondhand and have a 3 month warranty
Unless otherwise stated, photos are for illustrative purposes only
UK delivery included on orders of £10 or more (exceptions apply), please ask for overseas delivery cost.
Please check for compatibility. Official orders welcome. E&OE
If you have a sales enquiry please email our sales department
Unit 16, Arunside Ind. Est., Wick, Littlehampton, West Sussex, BN17 7QU, UK. 01903 523222 (full contact details)
If you have any comments or problems please email email@example.com
CJE Micro’s is not responsible for the contents of external internet sites.
Last updated: Fri, 03 Feb 2023